NEC CLOCK SETTING


 

 

 

DS-1000 & DS-2000

1. Go to extension 300. (Usually the reception phone. If unsure of extension number,   press 6 on any idle telephone and the extension number will appear in the display).

2. Press #TD (#83) for Time/Date.

3. Current time will appear in the display.

    Enter time in 24-hour clock using the following format:

    (HHMMSS) Hours (2 digits), Minutes (2 digits) and Seconds (2 digits)

4. Press HOLD

5. Current date will appear in the display.

    If the date is correct you may press HOLD then SPK to exit programming OR

    Enter date using the following format:

    (MMDDYYYY) Month (2 digits), Day (2 digits) and Year (4 digits)

6. Press HOLD then SPK.

 

 

 

 

ELITE / ELECTRA

Programming is done from first 2 station ports on system.

1.    Press FNC key  

2.    Dial 9

3.    Dial #

4.    Dial current time (e.g. 03:29)

5.    Press the RECALL key to toggle AM/PM

6.    Press the HOLD key to advance to the calendar

7.    Press the RECALL key to select the day of the week

8.    Press the # key to move the cursor to the day of the month setting

9     Enter the day by using the dial pad

10.  Press the RECALL key to select the month

11.  Press the # key to move the cursor to the year setting

12.  Enter the year by using the dial pad (only the last two digits are entered)

13.  Press the FNC key

 

NOTE:  if only setting the time, press the FNC key after making the changes

 

 
 
COPYRIGHT © 2007 BTS Inc. All Rights Reserved.